Datasheet · Checkweighers · GB
CW3 RUN-WET 1500L
by LOMA SYSTEMS
IP69-tested CW3 RUN-WET washdown checkweigher for packaged or semi-packaged food before final sealing, in the 1500L size for packs up to 1,500 g.
At a glance
- g · Weighing range
- 10–1500
- m/min · Belt speed
- 115
- mm · Belt width
- 200–300
How a checkweigher works
A checkweigher weighs every pack as it moves along the line and pushes out any pack that is too light or too heavy. It is how a factory makes sure each packet holds at least the weight printed on it, without stopping the line. It usually sits right after the packing machine, often next to a metal detector.
Step 1: Pack enters
A sealed pack arrives from the packing machine and an infeed belt spaces it from the next one.
Step 2: Weighed on the move
The pack crosses a belt resting on a load cell, which weighs it without stopping.
Step 3: Compared to target
The controller checks the weight against the set limits for that product.
Step 4: Rejected or passed
Packs outside the limits are pushed or blown off the line; the rest carry on.
Specifications
Performance
| Weighing range | 10–1500 g |
|---|---|
| Belt speed | 115 m/min |
Format
| Belt width | 200–300 mm |
|---|
Configuration
| Reject systems | pusher, dual air blast |
|---|
Installation
| Protection rating | IP69 |
|---|
Utilities
| Power supply | 110 or 230 V, 1-phase, 50 or 60 Hz |
|---|
See it run
Maker video: Discover what makes the CW3 RUN-WET® Quicker and Easier to Clean
Key features
- Tested to IP69 for high-pressure, high-temperature washdown
- Runs immediately after washdown without drying
- Multilevel password protection via RFID tags
- Auto-zero compensation for spilled product on the weighing platform
- Approved systems to OIML R51 and MID (EC TAC)
- Data via USB, Ethernet, TRACS and OPC-UA
Typical products
- meat, poultry and fish
- fruit, vegetables and nuts
- dairy and egg products
- convenience food
Options
- TRACS data logging software
CW3 RUN-WET 1500L: questions buyers ask
What does a checkweigher do?
A checkweigher weighs every pack as it moves along the line and pushes out any pack that is too light or too heavy. It is how a factory makes sure each packet holds at least the weight printed on it, without stopping the line. It usually sits right after the packing machine, often next to a metal detector.
Similar models from other makers
- Ishida DACS-GN-F015Speed 480 packs/min · Precision (standard deviation) 0.01 g
- Minebea Intec EWK WS 10/20 kgSpeed 200 packs/min · Precision (standard deviation) 0.1 g
- WIPOTEC EC-ESpeed 150 packs/min · Precision (standard deviation) 0.15 g
- Minebea Intec FlexusSpeed 600 packs/min · Precision (standard deviation) 0.017 g
- WIPOTEC HC-ASpeed 600 packs/min · Precision (standard deviation) 0.05 g
- Minebea Intec SynusSpeed 250 packs/min · Precision (standard deviation) 0.017 g