Datasheet · Checkweighers · DE
Flexus
Dynamic checkweigher in hygienic design with an EMFC load cell, offered with 1, 2, 5 and 7 kg weighing systems. Minebea Intec rates it at up to 600 pieces per minute (WS 1 kg).
At a glance
- packs/min · Speed
- 600
- g · Precision (standard deviation)
- 0.017
- g · Scale division
- 0.1
How a checkweigher works
A checkweigher weighs every pack as it moves along the line and pushes out any pack that is too light or too heavy. It is how a factory makes sure each packet holds at least the weight printed on it, without stopping the line. It usually sits right after the packing machine, often next to a metal detector.
Step 1: Pack enters
A sealed pack arrives from the packing machine and an infeed belt spaces it from the next one.
Step 2: Weighed on the move
The pack crosses a belt resting on a load cell, which weighs it without stopping.
Step 3: Compared to target
The controller checks the weight against the set limits for that product.
Step 4: Rejected or passed
Packs outside the limits are pushed or blown off the line; the rest carry on.
Specifications
Performance
| Speed | 600 packs/min |
|---|---|
| Precision (standard deviation) | 0.017 g |
| Scale division | 0.1 g |
| Belt speed | 12–156 m/min |
Format
| Belt width | 50–300 mm |
|---|
Configuration
| Reject systems | pusher, blower; optional rocker, swivel arm, multi-segment separator |
|---|
Installation
| Protection rating | IP54 |
|---|---|
| Machine weight | 250–400 kg |
Utilities
| Power supply | 115/230 VAC; 50/60 Hz |
|---|
See it run
Pairs with
Vistus metal detector (Flexus Combi)
Key features
- EMFC (electro-magnetic force compensation) load cell
- Hygienic design developed to IFS and BRC guidelines
- Weighing systems WS 1, 2, 5 and 7 kg
- Up to 600 pieces per minute (WS 1 kg)
- MID-compliant per OIML R51; MID verifiable systems up to 3 m/s
- Tool-free removal and fitting of conveyor belts
Typical products
- packaged foods
Options
- Flexus 15 touchscreen
- rocker, swivel arm and multi-segment separators
- stainless steel conveyor (SSC)
- hygienic adjustable feet
- multiline systems
- trend controller
- FDA 21 CFR Part 11 audit trail
- Vistus metal detection
Datasheet (PDF): Minebea Intec Flexus datasheet
Flexus: questions buyers ask
What does a checkweigher do?
A checkweigher weighs every pack as it moves along the line and pushes out any pack that is too light or too heavy. It is how a factory makes sure each packet holds at least the weight printed on it, without stopping the line. It usually sits right after the packing machine, often next to a metal detector.
Similar models from other makers
- Ishida DACS-GN-F015Speed 480 packs/min · Precision (standard deviation) 0.01 g
- WIPOTEC EC-ESpeed 150 packs/min · Precision (standard deviation) 0.15 g
- WIPOTEC HC-ASpeed 600 packs/min · Precision (standard deviation) 0.05 g
- WIPOTEC HC-MSpeed 250 packs/min · Precision (standard deviation) 0.1 g
- WIPOTEC HC-M-MDiSpeed 250 packs/min · Precision (standard deviation) 0.1 g
- WIPOTEC HC-M-WDSpeed 250 packs/min · Precision (standard deviation) 0.1 g