Datasheet · Checkweighers · DE
HC-M
by WIPOTEC GmbH
Medium-range checkweigher series with WIPOTEC EMFR weigh cells in a stainless steel housing. WIPOTEC rates it at up to 250 pcs/min.
At a glance
- packs/min · Speed
- 250
- g · Precision (standard deviation)
- 0.1
- g · Scale division
- 0.01
How a checkweigher works
A checkweigher weighs every pack as it moves along the line and pushes out any pack that is too light or too heavy. It is how a factory makes sure each packet holds at least the weight printed on it, without stopping the line. It usually sits right after the packing machine, often next to a metal detector.
Step 1: Pack enters
A sealed pack arrives from the packing machine and an infeed belt spaces it from the next one.
Step 2: Weighed on the move
The pack crosses a belt resting on a load cell, which weighs it without stopping.
Step 3: Compared to target
The controller checks the weight against the set limits for that product.
Step 4: Rejected or passed
Packs outside the limits are pushed or blown off the line; the rest carry on.
Specifications
Performance
| Speed | 250 packs/min |
|---|---|
| Precision (standard deviation) | 0.1 g |
| Scale division | 0.01 g |
Format
| Belt width | 120–400 mm |
|---|
Configuration
| Reject systems | pusher, air blast |
|---|
Installation
| Protection rating | IP54 |
|---|---|
| Machine weight | 230 kg |
Utilities
| Power supply | L1/N/PE; 100-240 VAC; 50/60 Hz |
|---|
See it run
Key features
- EMFR weigh cells
- Up to 250 pcs/min maximum output
- Stainless steel housing with infeed, weighing and outfeed belts
- Tiltable 15-inch colour touchscreen
- Available in a double-deck design that weighs two lanes in the footprint of one
- MID EU-type examination certificate DE-18-MI006-PTB001
Options
- double-deck design
- Ethernet, OPC, Profibus, ProfiNet, EtherNet/IP, RS232, RS422, RS485 interfaces
- compressed air supply
Datasheet (PDF): WIPOTEC HC-M datasheet
HC-M: questions buyers ask
What does a checkweigher do?
A checkweigher weighs every pack as it moves along the line and pushes out any pack that is too light or too heavy. It is how a factory makes sure each packet holds at least the weight printed on it, without stopping the line. It usually sits right after the packing machine, often next to a metal detector.
Similar models from other makers
- Ishida DACS-GN-F015Speed 480 packs/min · Precision (standard deviation) 0.01 g
- Minebea Intec EWK WS 10/20 kgSpeed 200 packs/min · Precision (standard deviation) 0.1 g
- Minebea Intec FlexusSpeed 600 packs/min · Precision (standard deviation) 0.017 g
- Minebea Intec SynusSpeed 250 packs/min · Precision (standard deviation) 0.017 g