Datasheet · Form-fill-seal machines · JP
INSPIRA NS25
Model code: INSPIRA-B-NS25-PH30-SNR(L)
Intermittent-motion INSPIRA snack food bagmaker with a flat single jaw and pinch sealing. Ishida rates it at 10-120 bags per minute.
At a glance
- packs/min · Speed
- 120
- mm · Bag width
- 70–250
- mm · Bag length
- 50–300
How a form-fill-seal machine works
A form-fill-seal machine turns a flat roll of packaging film into bags, fills each bag with a measured amount of product and seals it shut, all in one continuous cycle. The bag of chips, namkeen or milk powder you buy in a shop was most likely made this way. Vertical machines (VFFS) like the ones on this page are the most common type for snacks, powders and granules.
Step 1: Film unwinds
A roll of printed film feeds into the machine and is pulled down at a steady pace.
Step 2: Bag is formed
The film wraps around a forming tube and its edges are sealed into a tube.
Step 3: Product drops in
A weigher or filler above releases one measured portion down the tube.
Step 4: Sealed and cut
Horizontal jaws seal the bag closed and a knife cuts it free.
Specifications
Performance
| Speed | 120 packs/min |
|---|
Format
| Bag width | 70–250 mm |
|---|---|
| Bag length | 50–300 mm |
| Max film reel diameter | 500 mm |
| Film reel core diameter | 75 mm |
Configuration
| Sealing motion | Intermittent |
|---|---|
| Sealing | Horizontal: flat single jaw with knife; vertical: pinch sealing |
Utilities
| Power | 4.7 kW |
|---|---|
| Power supply | 3-phase, 200 V AC, 50/60 Hz |
| Air consumption | 120 l/min |
| Air pressure | 5–10 bar |
Installation
| Machine weight | 750 kg |
|---|---|
| Machine size (L × W × H) | 1,825 × 990 × 1,600 mm |
See it run
Maker video: New Bagmaker INSPIRA
Pairs with
Ishida multihead weigher (brochure shows an integrated weigher and bagmaker line)
Key features
- Intermittent-motion jaw with flat single jaw and knife for horizontal sealing
- Pinch sealing for the vertical seal
- Rated 10-120 bags per minute
- Bag width 70-250 mm (50 mm with small-bag option), length 50-300 mm
- 15.6-inch colour LCD touch panel; stainless steel body
- Product-in-seal detection at the jaws and automatic nitrogen flow optimisation
Bag styles
- flat bag
- flat bag with punch-hole
- gusset bag
- block-bottom bag
- chain bags
- VSU (one-side gusset, stands on its own)
Typical products
- snack foods
Options
- auto splicer
- pack print verification
- automatic positioning of the former roller
- automated air-fill technology
- browsing motion to reduce product in seal
- modified atmosphere packaging (MAP)
- paper packaging
- small-bag option for 50-69 mm width
Datasheet (PDF): Ishida INSPIRA NS25 datasheet
INSPIRA NS25: questions buyers ask
What does a form-fill-seal machine do?
A form-fill-seal machine turns a flat roll of packaging film into bags, fills each bag with a measured amount of product and seals it shut, all in one continuous cycle. The bag of chips, namkeen or milk powder you buy in a shop was most likely made this way. Vertical machines (VFFS) like the ones on this page are the most common type for snacks, powders and granules.
How fast is the Ishida INSPIRA NS25?
Ishida rates it at up to 120 packs per minute.
What bag sizes does the Ishida INSPIRA NS25 make?
Ishida lists bags 70–250 mm wide and 50–300 mm long.
Which bag styles can the Ishida INSPIRA NS25 make?
Ishida lists flat bag, flat bag with punch-hole, gusset bag, block-bottom bag, chain bags and VSU (one-side gusset, stands on its own).
Which products is the Ishida INSPIRA NS25 used for?
Ishida lists snack foods.
How much power does the Ishida INSPIRA NS25 need?
Ishida lists 4.7 kW.
Similar models from other makers
- Nichrome India Maxima 200Speed 200 packs/min · Bag width 70–130 mm
- Pakona Engineers PK-70Speed 120 packs/min · Bag width 70–230 mm
- Sanko Machinery FC1000GLSpeed 110 packs/min · Bag width 10–60 mm
- Nichrome India Maxima 400Speed 400 packs/min · Bag width 70–130 mm
- Pakona Engineers PK-70 LargeSpeed 70 packs/min · Bag width 70–350 mm
- Sanko Machinery FC1000GWSpeed 110 packs/min · Bag width 10–60 mm