Datasheet · Form-fill-seal machines · IN
PK-70
by Pakona Engineers (I) Pvt. Ltd.
VFFS machine with servo film pulling and servo cross seal for pillow, gusseted and block-bottom bags in co-extruded LDPE or heat-sealable laminates. Pakona offers it with auger, volumetric cup or multihead weigher fillers.
At a glance
- packs/min · Speed
- 120
- mm · Bag width
- 70–230
- mm · Bag length
- 100–390
How a form-fill-seal machine works
A form-fill-seal machine turns a flat roll of packaging film into bags, fills each bag with a measured amount of product and seals it shut, all in one continuous cycle. The bag of chips, namkeen or milk powder you buy in a shop was most likely made this way. Vertical machines (VFFS) like the ones on this page are the most common type for snacks, powders and granules.
Step 1: Film unwinds
A roll of printed film feeds into the machine and is pulled down at a steady pace.
Step 2: Bag is formed
The film wraps around a forming tube and its edges are sealed into a tube.
Step 3: Product drops in
A weigher or filler above releases one measured portion down the tube.
Step 4: Sealed and cut
Horizontal jaws seal the bag closed and a knife cuts it free.
Specifications
Performance
| Speed | 120 packs/min |
|---|
Format
| Bag width | 70–230 mm |
|---|---|
| Bag length | 100–390 mm |
Utilities
| Power | 6.5 kW |
|---|---|
| Power supply | 3-phase + N, 415 V, 50 Hz |
| Air pressure | 6 bar |
Installation
| Machine size (L × W × H) | 1,200 × 2,000 × 1,600 mm |
|---|
See it run
Pairs with
Auger filler, volumetric cup filler or multihead weighing scale
Key features
- 5.7-inch colour touch screen and independent electrical panel
- Servo-driven film pulling
- Up to 120 pouches per minute (dry run)
- Filling capacity 50-1000 cc; pillow bag width 70-230 mm
- Lubrication-free design with safety interlocked guards
- Mild steel painted frame; product contact parts in AISI-316
Bag styles
- pillow
- side gusset
- block bottom
Films
- co-extruded LDPE
- heat-sealable laminates
Options
- servo-driven cross seal
- M.A.P. support
- pneumatically expandable reel shafts
- pre-unwind system with manual splice table
- vacuum film advance
Datasheet (PDF): Pakona Engineers PK-70 datasheet
PK-70: questions buyers ask
What does a form-fill-seal machine do?
A form-fill-seal machine turns a flat roll of packaging film into bags, fills each bag with a measured amount of product and seals it shut, all in one continuous cycle. The bag of chips, namkeen or milk powder you buy in a shop was most likely made this way. Vertical machines (VFFS) like the ones on this page are the most common type for snacks, powders and granules.
How fast is the Pakona Engineers PK-70?
Pakona Engineers rates it at up to 120 packs per minute.
What bag sizes does the Pakona Engineers PK-70 make?
Pakona Engineers lists bags 70–230 mm wide and 100–390 mm long.
Which bag styles can the Pakona Engineers PK-70 make?
Pakona Engineers lists pillow, side gusset and block bottom.
How much power does the Pakona Engineers PK-70 need?
Pakona Engineers lists 6.5 kW.
Similar models from other makers
- Ishida INSPIRA CS25Speed 160 packs/min · Bag width 70–250 mm
- Nichrome India Maxima 200Speed 200 packs/min · Bag width 70–130 mm
- Sanko Machinery FC1000GLSpeed 110 packs/min · Bag width 10–60 mm
- Ishida INSPIRA CS33Speed 150 packs/min · Bag width 70–330 mm
- Nichrome India Maxima 400Speed 400 packs/min · Bag width 70–130 mm
- Sanko Machinery FC1000GWSpeed 110 packs/min · Bag width 10–60 mm