Datasheet · Form-fill-seal machines · JP
FC80
Small stick packaging machine for powders, made as a compact model for small lots in 1-line and 2-line configurations. It can be connected to an auger filling device or a weighing machine.
At a glance
- packs/min · Speed
- 70
- mm · Bag width
- 10–60
- mm · Bag length
- 20–190
How a form-fill-seal machine works
A form-fill-seal machine turns a flat roll of packaging film into bags, fills each bag with a measured amount of product and seals it shut, all in one continuous cycle. The bag of chips, namkeen or milk powder you buy in a shop was most likely made this way. Vertical machines (VFFS) like the ones on this page are the most common type for snacks, powders and granules.
Step 1: Film unwinds
A roll of printed film feeds into the machine and is pulled down at a steady pace.
Step 2: Bag is formed
The film wraps around a forming tube and its edges are sealed into a tube.
Step 3: Product drops in
A weigher or filler above releases one measured portion down the tube.
Step 4: Sealed and cut
Horizontal jaws seal the bag closed and a knife cuts it free.
Specifications
Performance
| Speed | 70 packs/min |
|---|
Format
| Bag width | 10–60 mm |
|---|---|
| Bag length | 20–190 mm |
| Max film reel diameter | 350 mm |
Configuration
| Sealing | Heat seal; push-type vertical sealer (lap seal) as standard |
|---|
Utilities
| Power | 6 kW |
|---|---|
| Power supply | 3-phase, 200 V AC, 50/60 Hz |
| Air consumption | 200 l/min |
| Air pressure | 6 bar |
Installation
| Machine weight | 500 kg |
|---|---|
| Machine size (L × W × H) | 1,200 × 1,360 × 2,100 (W × D × H) mm |
See it run
Maker video: SANKO MACHINERY CO.,LTD Stick bag filling packaging machine FC1000G
Pairs with
Auger filling device, weighing machine or mass weighing machine
Key features
- Compact stick packaging model for small lots
- Built in 1-line and 2-line sizes
- 15-70 bags per minute per line
- Bag length 20-190 mm, width 10-60 mm
- Standard turn-table (measuring cup) filling device
- Machine weight 500 kg; W1200 x D1360 x H2100 mm
Bag styles
- stick bag
- lap seal pillow (standard push-type vertical sealer)
Typical products
- powder
Options
- nitrogen gas flushing unit
- auger filling device
- pico scale
- grip-type vertical sealer (fin seal)
- seal cooling unit
- I notch unit
- perforation unit
- empty bag detection unit
- static electricity eliminator
- hot, thermal and ink jet printers
Datasheet (PDF): Sanko Machinery FC80 datasheet
FC80: questions buyers ask
What does a form-fill-seal machine do?
A form-fill-seal machine turns a flat roll of packaging film into bags, fills each bag with a measured amount of product and seals it shut, all in one continuous cycle. The bag of chips, namkeen or milk powder you buy in a shop was most likely made this way. Vertical machines (VFFS) like the ones on this page are the most common type for snacks, powders and granules.
How fast is the Sanko Machinery FC80?
Sanko Machinery rates it at up to 70 packs per minute.
What bag sizes does the Sanko Machinery FC80 make?
Sanko Machinery lists bags 10–60 mm wide and 20–190 mm long.
Which bag styles can the Sanko Machinery FC80 make?
Sanko Machinery lists stick bag and lap seal pillow (standard push-type vertical sealer).
Which products is the Sanko Machinery FC80 used for?
Sanko Machinery lists powder.
How much power does the Sanko Machinery FC80 need?
Sanko Machinery lists 6 kW.
Similar models from other makers
- Ishida INSPIRA CS25Speed 160 packs/min · Bag width 70–250 mm
- Nichrome India Maxima 200Speed 200 packs/min · Bag width 70–130 mm
- Pakona Engineers PK-70Speed 120 packs/min · Bag width 70–230 mm
- Ishida INSPIRA CS33Speed 150 packs/min · Bag width 70–330 mm
- Nichrome India Maxima 400Speed 400 packs/min · Bag width 70–130 mm
- Pakona Engineers PK-70 LargeSpeed 70 packs/min · Bag width 70–350 mm